Software 59 / Fiat Grande - Punto / BSI Delphi
Memory device is serial EEPROM 93c86 SMD8 package or NEC MCU.
For serial EEPROM 93c86 expected file size is 2048 bytes.
You can read Fiat BSI by OBD2 usingย theย Immo tool with Fiat software activation.
For files read by OBD2 expected size is 21 or 32768 or 65536 bytes.
Use PCF7936 or Silca T14 โ JMA TP12 or CN3 transponder or remote key with PCF7946.
The software shows a 5-digit PIN code.
The written transponder is ready and programmed to start the vehicle.
Note: for files read by OBD2 from NEC MCU software shows the PIN code and prepares keys but does not create a new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANTย when you want to program the remote key: open the key and look on PCB.
You will find 2 SMD chips โ PCF7946 (SMD 14 pins) and a smaller SMD chip, which can be with 8, 10, or 16 pins.
If a smaller SMD chip is withย 10 or 16ย pins, PROGRAM KEY ASย TYPE 1.
If a smaller SMD chip is withย 8 pins, PROGRAM KEY ASย TYPE 2.
IMPORTANT: if the buttons of the remote operate, but do not work properly, for ex. button for locking opens the trunk, this isย NOT A TMPro SOFTWARE PROBLEM. Use another type of remote.
Vehicles equipped with this unit:
Fiat: Grande Punto, 500, Fiorino, Qubo, Doblo
Alfa Romeo: Mito
Ford: KA
Citroen: Nemo
Peugeot: Bipper
Opel: Combo D
Software 59 / Fiat Grande - Punto / BSI Delphi
Memory device is serial EEPROM 93c86 SMD8 package or NEC MCU.
For serial EEPROM 93c86 expected file size is 2048 bytes.
You can read Fiat BSI by OBD2 usingย theย Immo tool with Fiat software activation.
For files read by OBD2 expected size is 21 or 32768 or 65536 bytes.
Use PCF7936 or Silca T14 โ JMA TP12 or CN3 transponder or remote key with PCF7946.
The software shows a 5-digit PIN code.
The written transponder is ready and programmed to start the vehicle.
Note: for files read by OBD2 from NEC MCU software shows the PIN code and prepares keys but does not create a new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANTย when you want to program the remote key: open the key and look on PCB.
You will find 2 SMD chips โ PCF7946 (SMD 14 pins) and a smaller SMD chip, which can be with 8, 10, or 16 pins.
If a smaller SMD chip is withย 10 or 16ย pins, PROGRAM KEY ASย TYPE 1.
If a smaller SMD chip is withย 8 pins, PROGRAM KEY ASย TYPE 2.
IMPORTANT: if the buttons of the remote operate, but do not work properly, for ex. button for locking opens the trunk, this isย NOT A TMPro SOFTWARE PROBLEM. Use another type of remote.
Vehicles equipped with this unit:
Fiat: Grande Punto, 500, Fiorino, Qubo, Doblo
Alfa Romeo: Mito
Ford: KA
Citroen: Nemo
Peugeot: Bipper
Opel: Combo D
ืืืืข ืขื ืืืืฆืจ
ืืืืข ืขื ืืืืฆืจ
ืืฉืืื ืืืืืจืืช
ืืฉืืื ืืืืืจืืช
Description
Memory device is serial EEPROM 93c86 SMD8 package or NEC MCU.
For serial EEPROM 93c86 expected file size is 2048 bytes.
You can read Fiat BSI by OBD2 usingย theย Immo tool with Fiat software activation.
For files read by OBD2 expected size is 21 or 32768 or 65536 bytes.
Use PCF7936 or Silca T14 โ JMA TP12 or CN3 transponder or remote key with PCF7946.
The software shows a 5-digit PIN code.
The written transponder is ready and programmed to start the vehicle.
Note: for files read by OBD2 from NEC MCU software shows the PIN code and prepares keys but does not create a new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANTย when you want to program the remote key: open the key and look on PCB.
You will find 2 SMD chips โ PCF7946 (SMD 14 pins) and a smaller SMD chip, which can be with 8, 10, or 16 pins.
If a smaller SMD chip is withย 10 or 16ย pins, PROGRAM KEY ASย TYPE 1.
If a smaller SMD chip is withย 8 pins, PROGRAM KEY ASย TYPE 2.
IMPORTANT: if the buttons of the remote operate, but do not work properly, for ex. button for locking opens the trunk, this isย NOT A TMPro SOFTWARE PROBLEM. Use another type of remote.
Vehicles equipped with this unit:
Fiat: Grande Punto, 500, Fiorino, Qubo, Doblo
Alfa Romeo: Mito
Ford: KA
Citroen: Nemo
Peugeot: Bipper
Opel: Combo D
